Saturday I put four coats of water-based polyeurethane on the loft siding. I used an Earlex HVLP sprayer I bought on sale about five years ago but hadn’t used until now. The sprayer worked great and it took about 25 minutes to spray a finish coat. Because I used water based poly, drying time between coats was only two hours.

While waiting for the finish to dry between coats I started on a porch ceiling using T&G aspen siding I had left over from the loft. While not strictly necessary, I had the extra wood and it does dress it up a bit. I got all the planks cut to size and about a third of it installed.

Sunday I installed flooring in the loft. I used a cork floating flooring I got for $2 a square foot. The dark color is called “Sable Gibralter” and provides a nice contrast to the lighter siding but does tend to show my dusty footprints.

Upon leaving on Sunday, I-40 was closed due to a fire seven miles SE of Heber so I had take an alternate route home which took me farther north through the towns of Tabiona, Hanna, and Francis. It was only 22 miles farther but the route contained a lot of steep grades and tight curves and because the big trucks had to detour also, I spent a lot of time going under 20mph. The trip home took an hour and 50 minutes.

View Larger Map

Spraying poly on the loft siding HVLP turbine sprayer Using extra siding for a porch ceiling Planks cut to length Using extra siding for a porch ceiling Installing the cork flooring Installing the cork flooring Installing the cork flooring Installing the cork flooring Installing the cork flooring Installing the cork flooring Installing the cork flooring Hauling tools/supplies back and forth is a drag Slow drive home